Global Statclean Systems
Global Statclean Systems
GT Karnal Road, Swaroop Nagar, New Delhi, Delhi
GST No. 07ASDPG4151H1Z1
Send E-mail
View Mobile No.
Home  » Our Products  » 

ESD Testing & Measurement Equipment


Our product range includes a wide range of ge-102 wrist strap tester, bk498 antistatic portable wrist strap tester, surface resistivity meter 04, z 205 static charge meter, g-203 surface resistivity meter and wrist strap cum dual foot wear combo tester.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 2,000 / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Dimensions135 x 70 x 25 mm
Weight100 gms
Test Voltage9V
Display TypeDigital Only
Operating Tempera0 deg C~50 deg C
Modal NumberZe102
WarrantyOne year

Wrist Straps are the first line of defence against electrostatic charges build up on the human body. They are designed to carry away this charge as soon as it is generated. At the same time the strap must remain electrically safe for the user. Thus, it is important to test every strap regularly. In order to protect sensitive electronic components the maximum strap resistance should not be more than 10 meg ohms. On the other hand, the path to ground should have atleast 750 kiloohm resistance, as protection to the wearer from dangerous voltages and levels of current flow.The wrist strap tester checks  these parameters under actual operating conditions with the strap on the wrist. It clearly indicates whether or not the resistance of the strap system including the wearer falls within acceptable limits


Yes! I am interested


Get Best Quote

Approx. Rs 1,950 / Piece Get Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Model Name/NumberBK498
Dimensions160 x 80 x 45 mm (L x W x H)
Weight200g
Model191
Resolving Rate1 deg C
Range0 ~ 6 0 0 deg C
Applied SensorK(CA)Thermocouple
Accuracy+- 3 deg (in300~500 deg C Range)
Display3.5 LCD
Power006P 9V Dry Battery
Life of BatteryMore than 150 Hours
Environmental Temperature Range0~4 0 deg C

Operating Instruction:
  • Put the dry battery into the battery slot. 
  • Insert the red side of the sensor into the red connector and the blue side into the blue connector. Press the push button,insert the balance into the conductor column. 
  • Turn on the power switch and inspect the screen. If there are room temperature on the screen,the thermometer can be used. 
  • Dip new solder on the soldering tip to touch the test point. After 2 or 3 seconds, the actual temperature will be displayed on the screen. 
  • Turn off the power,when not in use.

Yes! I am interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 26,500 / pcs Get Latest Price

Product Brochure
Product Details:
Weight500gms
Relative HumidityRange from 5% to 95%; +/-10% Typ
Measurement RangeLess Than 1x10E3 to Greater Than 1x10E12 ohm
Power9.6V Rech-Battery
Dimensions205 x 110 x 40mm
Measurement Accuracy0.1 decade
Probe Voltage100V +/- 5%
Temperature Accuracy+/-5 deg C
Electrification Period10 Seconds
Warranty12 month

The model SRM-04 Digital Surface Resistivity Meter is a portable, versatile, instrument design to accurately measure the resistance between two points, surface to ground and surface resistivity accordance with EOS/ESD association standard S-4.1 in addition, the meter measures & displays ambient temperature & relative humidity The model SRM-04 Digital Surface Resistivity Meter (includes Testing & Measuring Probes) is designed to make measurements of Work surface, floors, foot wears, garments, workstations & operator chairs etc.

Yes! I am interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 13,500 / Piece Get Latest Price

Product Details:
Model Name/NumberZ 205
Usage/ApplicationIndustrial
Size135 X 70 X 30 mm
Weight200 gms
Accuracy+15%
Power supply9V Battery
Warranty1 year
ConstructionABS Plastic
Indicating Range0 to + 2000 V

The Static Charge Meter Z205 is a non-contact, light weight digital instrument designed to measure static voltages on objects & surfaces. It features a large LCD display to indicate the magnitude and polarity of the electrostatic charge directly in Kilovolts.

The special circuitry enables repeated and drift-free measurements without continual re-zeroing. The instrument has good directional sensitivity and is ideal for measuring electric charges encountered in critical electronic assembly and storage areas as well as Antistatic Work Stations. It can also be used for Plastics, Paper, Textiles, Food, Explosives and Pharmaceutical Industries.

The unit gives direct readings of electrostatic potentials on any surface, when held at a distance of 5 cms. However, higher electrostatic potentials can be measured by proportionately increasing the distance from the meter to the charged object.

The use of very low current circuitry results in a long battery life of over 6 months under normal use.

SPECIFICATIONS

Indicating Range+ 10 KV at 5 cms from object.(20KV on request)
Display3 1/2 digit LCD with polarity indication
ResolutionLSB 10V
Accuracy+10% of Reading
Test ActuationPush On push Off switch
Power Supply9 V battery.
Low batteryWarning at 7.5 V
Dimensions in mm125 x 75 x 29
Weight200 GMS
CalibrationRecommended every 12 months
TraceabilityTo national standards
Warranty12 months.
AccessoriesCarrying case


Additional Information:
  • Item Code: Z205

Yes! I am interested


Get Best Quote

Approx. Rs 4,900 / Piece Get Latest Price

Product Details:
Model Name/NumberG-203
Weight150 gms
Resolution1 decade
Power supply9V Battery
Dimensions125 x 75 x 29 mm
Measurement Accuracy1/2 decade
Measurement Range10^3 to 10^12 ohms/sq

Description

This is an ultra wide-range, battery operated, portable instrument for measuring Surface Resistivity of virtually any flat surface. In the circuit industry, products such as packaging materials, component storage bags and trays, work bench surfaces, table and floor mats, conveyor belts, etc., have resistance values which need to conform to stringent specifications. Moreover, these values are expected to fall within specified limits. The Surface Resistivity meter can play a vital role in monitoring and checking the resistivity characteristic of the above items.

It also has unique additional feature of surface-to-ground measurement capability wherein the resistivity differential between any surface and any chosen ground can be determined.

The surface resistivity is conveniently indicated by a row of LEDs covering a total of 10 decades from 10^3 to 10^13 ohms/square.

SPECIFICATIONS

Measurement Range 10^3 to 10^13 ohms/sq
Measurement accuracy half decade
Resolution One decade.
Excitation voltage 9 V
Indication Visual by LEDs
Test actuation Press to ON Switch.
Power supply 9 Volt DC battery.
Low battery Warning at 7.5 V
Dimensions in mm 125 x 75 x 29
Weight 150 GMS
Calibration Recommended every 12 months
Traceability To national standards
Warranty 12 months.
Accessories included 1 m Grounding Cord & Carrying case


Additional Information:
  • Item Code: Z-203-100

Yes! I am interested


Get Best Quote

Approx. Rs 14,000 / Piece Get Latest Price

Product Details:
Power Source9 V Battery
Weight5 kg
Warranty12 Months
Accuracy+/-10%
IndicationsPass - Green LED
Wrist Strap Pass Range0.75 to 10 megaohm
Height1000 mm
Foot Wears Pass Range0.75 to 100 megaohm
Battery StatusBy Dual Color LED
Dimensions160 x 95 x 40 mm

We are a leading manufacturer of Wrist Strap Cum Dual Foot Wear Combo Tester to our clients based in Delhi, India.

Application: 

  • The Wrist strap Cum Dual Footwear tester is a jig type arrangement to test the validity of ESD wrist strap & footwear. The instrument measures Independent test simultaneously for a right foot, left foot and wrist strap at the same time. Other Footwear testers can only measure two foot at a time, or the combined resistance of both foot. The wrist strap cum dual foot tester reduces the testing time by half, and offers the operator a visual and audible measurement of pass or fail of both foot and wrist strap before entering the EPA

Yes! I am interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 1,950 / Piece Get Latest Price

Product Details:
WeightApprox 125 G
Dimensions135 x 70 x 25 mm
Detection MethodCharge Coupling by Field Interception Detection
IndicationLED Vsual Indication with Audible Alarm
Power Supply9 V Battery
RangeAuto Ranging and Auto Resetting

We are a leading supplier, manufacturer, of Electrostatic Alarm in India.

Product Details:

  • The Static Alarm is a portable, selection Battery-operated instrument, incorporating the latest technology, to indicate the presence of approaching static electricity.

  • It is designed to provide a quick and convenient method of locating static charges.

  • It is primarily intended for use in static-safe handling areas, as an early warning system to alert the personnel nearby.


Yes! I am interested


Get Best Quote

Approx. Rs 19,500 / Piece Get Latest Price

Product Details:
Usage/ApplicationResistance Meter
BrandGlobal Statclean
Operating Temperature0-50 Degree C
ModelSRM-02
UsageLaboratory
Voltage100 V

We are a leading manufacturer of 100 V Surface Resistivity Meter to our valuable clients based in Delhi, India.

Application & Features:

  • 100V Surface Resistivity meter is a portable, versatile, instrument designed to accurately measure Resistance between two points, surface to ground, and surface Resistivity is accordance with EOS/ESD Association standard S 20.20.2014.The Surface Resistivity meter (included TESTING & MEASURING PROBES) is designed to make all the measurements.

Yes! I am interested


Get Best Quote

Approx. Rs 3,950 / pcs Get Latest Price

Product Details:
BrandGlobal Statclean
UsageLaboratory, Industrial
Weight200 g
Dimensions125 x 75 x 29 mm
ResolutionOne Decade
Measurement Range10^3 to 10^12 ohms
CalibrationRecommended every 12 months
TraceabilityTo National Standards
Warranty12 months
Accessories Included1 m Grounding Cord and Carrying case
Measurement AccuracyHalf Decade
Excitation Voltage9 V
IndicationVisual by LED
Test Actuation9 V DC Battery
Low BatteryWarning at 7.5 V

We are a leading manufacturer, supplier, and wholesaler of Surface Resistivity Meter.

Application & Features:
Surface Resistivity Meter is an ultra-wide-range, battery operated, and portable instrument for measuring Surface Resistivity of virtually any flat surface. In the circuit industry, products such as packaging materials, component storage bags and trays, workbench surfaces, table and floor mats, conveyor belts, etc., have resistance values which need to conform to stringent specifications. Moreover, these values are expected to fall within specified limits. The Surface Resistivity meter can play a vital role in monitoring and be checking the resistivity characteristic of the above items.

It also has the unique additional feature of surface-to-ground measurement capability wherein the resistivity differential between any surface and any chosen ground can be determined. The surface resistivity is conveniently indicated by a row of LEDs covering a total of 10 decades from 10^3 to 10^12 ohms/square.



Yes! I am interested


Get Best Quote

Approx. Rs 4,500 / Piece Get Latest Price

Product Brochure
Product Details:
BrandGlobal Statclean
Weight22 ounces, with batteries
DisplayDigital Only
UsageIndustrial, Laboratory
Dimensions135 x 70 x 25 mm
Testing Voltage9V
Model NoPRS-812
Open Circuit CurrentLess Than 4 ma, 100 Volts

We are a leading manufacturer of Digital Surface Resistance Meter in India.

Application & Features:

  • This is a wide-range, battery operated, portable instrument for measuring Surface Resistivity of a surface or Resistance between 2 points. In the electronics industry, products such as packaging materials, component storage bags and trays, workbench surfaces, table and floor mats, etc., have resistance values which need to conform to stringent specifications and fall within specified limits.


The material characteristics:

  • Conductive
  • Dissipative
  • Insulative


The additional features:

  • Data Hold function
  • Surface-to-ground measurement
  • Ambient Temperature measurement
  • All indicated on a large backlit LCD display

Yes! I am interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 22,500 / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Power Source9V Battery
Weight210 gm
Model NumberG-134
Display TypeDigital
Warranty12 months
BrandGlobal
Dimensions160 x 95 x 40 mm
Pass RangeWrist Strap 0.75 to 10.0 meg ohm
Footwear0.75 to 0.35 meg ohm
Accuracy+10%

Wrist straps and ESD footwears are the first line of defence against electrostatic charge build up on the human body. They are designed to carry away this charge as soon as it is generated. At the same time the wriststrap/footwear must remain electrically safe for the user. Thus, it is important to test every wrist strap/footwear regularly. The maximum wrist strap resistance should not be more than 10 meg ohms and Footwear resistance should not be more than 35 Mega ohms. Also the resistance should not be less than 0.75 Mohm as protection to the wearer from dangerous voltages. This Combo Tester is a combination Wriststrap & Dual footwear tester which checks these parameters under actual realtime operating conditions. The footwear section gives a warning if either of the Footwear is defective. This is done by keeping 1 foot on the plate at a time. Door Access System: Before entering the EPA (ESD Protected Area) personnel need to test their Wrist Strap/ESD footwear. Access into the EPA is allowed by the release of the Electromagnetic lock only if the resistance of the Wrist Strap/ESD footwear is within the Pass limits.

Yes! I am interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 350 / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Pin Type3 Pin
ColorGreen
Usage/ApplicationEarthing of ESD Table
Length1-2 meter
Model NumberG38-3P

  • Grounding Cord With 3-Pin Plug
  • Length: 1.5-2 m
  • Series Resistance: 1 M ohm
  • Durable and flaxiable
Mat grounding cord with 3 pin plug. Series resistance 1M Ohm. Wire Length 1.8 to 2 meters. Colour Green. Only Earthing pin is working, other 2 pins are dummy. Can be easily fitted in 3 pin electrical socket.

Yes! I am interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 16,500 / Piece Get Latest Price

Product Details:
Minimum Order Quantity1 Piece
Phaseesd
Usage/ApplicationLaboratory
Weight200 g
Power supply9 V DC Battery

The instrument is ideal for use in
such static sensitive environment
as electronic component
production and assembly areas,
clean rooms, computer, medical
and R&D Laboratories, surgical
rooms, medical device
manufacturer, printing press,
packing and production lines, etc.
The unit gives direct readings of
electrostatic potentials on any
surface, when held at a distance of
1 Inch. However, virtually any
electrostatic potential can be
measured by proportionately
increasing the distance from the
meter to the charged object.
SPEFIFICATIONS:
Measurement Range : +/- 10kV @ 1 Inch (Accuracy: +/-10%)
+/- 20kV @ 2 Inch (Accuracy: +/-15%)
+/- 30kV @ 3 Inch (Accuracy: +/-20%)
Resolution : 100 Volts
Indication : 2 ½ Digit LCD Display
Test actuation : Press TO read
Power supply : 9 Volt Battery
Battery Status : By Dual color LED.
Calibration : Recommended every 12 months
Dimensions : 135 x 70 x 25 mm
Weight : 150 Gms
Warranty : 12 Months
Accessories : Carry case.

Yes! I am interested


REQUEST CALLBACK
Get Best Quote

Approx. Rs 34,500 / Piece Get Latest Price

Product Details:
UsageIndustrial
Weight500 g
Display TypeDigital
Circuit Voltage100 Volt

The Surface Resistivity Meter Measures Both Surface Resistance And Resistance To Ground.
This Is Meant For Use In Evaluating A Wide Variety Of Esd Protective Materials Including Table Mats, Floor Mats,And Hard Esd-Laminates.

It Measures And Displays Surface Resistivity As Well As Surface To Ground And Point-To-Point Resistances. These Measurements Can Be Done In The Range Of <10E3To >10E12 Ohms By Using Two 2.5-Kilo (5Lb) Heavy Electrodes Orthrough Internal Probes.
To Check Whether Surface Resistivity Is Inaccordance With Eos/Esd Association Standards S-4.1.Srm-03

Yes! I am interested


Get Best Quote

Approx. Rs 10,500 / Piece Get Latest Price

Product Details:
Dimensions125 x 75 x 29 mm
Display TypeDigital
Weight145 g
BrandGlobal
Power9V Optional AC/DC Power Adapter
Model NoZ124
Accuracy+10%
Power Requirement9 V DC battery
Pass RangeWrist strap 0.75 to 10.0 meg ohm

Wrist straps and ESD footwears are the first line of defence against electrostatic charge build up on the human body. They are designed to carry away this charge as soon as it is generated. At the same time the wrist strap/footwear must remain electrically safe for the user. Thus, it is important to test every wrist strap/footwear regularly.In order to protect sensitive electronic components, the maximum wrist strap resistance should not be more than 10 meg ohms and Footwear resistance should not be more than 35 Mega ohms. On the other hand, the resistance should not be less than 0.75 Mohm as protection to the wearer from dangerous levels of voltage and current flow. This Combo Tester is a combination Wriststrap DUAL footwear tester which checks these parameters under actual realtime operating conditions. The footwear section gives a warning if either of the Footwear is defective.

Yes! I am interested


Get Best Quote

Approx. Rs 10,900 / Piece Get Latest Price

Product Details:
Model Name/NumberZ2055
Dimensions125 x 75 x 29mm
Power Supply9 V battery
Weight200 gm
Indicating Range0 to +2000 V
Display3.5 digit
Accuracy+15%
Warranty1 year
ConstructionABS Plastic

Description

This instrument is designed to measure the Static Voltages carried on a human body. It is a good auditing tool to verify whether Personnel entering an ESD safe area are carrying any hazardous charges on themselves. It can also serve to verify whether all the ESD protection measures which have been taken to make a particular area ESD safe are effective. By such measures we mean conductive flooring, antistatic table mats, wrist straps, static sheilding bags, ionizing equipment, conductive containers and bins etc.

It is very simple to use and only requires the personnel under test to touch the Button on the instrument and directly read the charge level in volts on the meter.

The Z2055A version gives a hazard warning if Voltage measured exceeds 100V

SPECIFICATIONS

Indicating range0 to + 2000V
Test ActuationOn/Off push button switch
Warning(in Z2055A)230V AC 50Hz 70 Watts
Display3.5 digit LCD display with polarity indication
Accuracy+15%
Test SurfaceNickel plated button
Power Supply9 V battery
Low batteryWarning at < 7.5 V on Display
CalibrationRecommended once every 12 months
TraceabilityTo national standards
AccessoriesCarrying case & Grounding Cord
ConstructionABS plastic cabinet
WarrantyOne year

Yes! I am interested


Get Best Quote

Approx. Rs 2,150 / Unit Get Latest Price

Product Details:
MaterialESD Mat on Acrylic Backing
BrandGlobal Statclean
Voltage220V
Resistance2.2 Megohm
FinishBrushed effect
Wire Length1 Meter
Frequency50 Hz

We are a leading manufacturer of Static Discharge Palmplate And Cord in India.

Application:

  • The Grounding Palmplate is a convenient and quick solution to ensuring that there is no charge on the Human Body before entering any ESD safe area. It has a conductive Stainless Steel electrode plate mounted onto an acrylic backing.
  • The plate can be mounted on the wall at a convenient height and the personnel has to just touch the plate to drain any charge from the body.
  • The Plate is supplied with a Grounding cord which needs to be connected to any ESD earth point. A 2.2 megohm resistor is provided in the ground cord as a precaution against the risk of shock.

    Yes! I am interested


    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 8,000 / Unit Get Latest Price

    Product Details:
    ColorYellow
    Connectivity TypeWired
    Power SourcePower Adapter
    Body MaterialABS
    Test ActuationPush Button Switch
    Display3.5 Digit LCD Display with Polarity Indication
    Test SurfaceNickel Plated
    AccessoriesCarrying Case and Grounding Cord
    Dimension125 x 75 x 29 mm

    We are a leading manufacturer of ESD Access Control System in India.

    Application & Features:

    • This instrument is designed to detect the level of Static Charges present on a human body and allow access into an ESD safe area provided the Body Static voltage is under 100V.
    • It is very simple to use and only requires the personnel to Press & Hold the Test Button on the instrument. If the Body voltage is under 100V, the Green PASS Led will light and the magnetic lock is deactivated for a few seconds thereby allowing access through a door or turnstile.
    • The personnel should normally be free of Static Voltage provided proper ESD protection measures have been taken. Therefore, it also serves to verify whether the measures taken to make a particular area ESD safe are effective. By such measures we mean conductive flooring, ESD wrist straps & Footwear, ionizing equipment, etc.

    Yes! I am interested


    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 3,200 / Piece Get Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Piece
    WeightApprox 150 g with Battery
    Accuracy+/-10%
    IndicationsPass - Green LED
    Range SelectionBy Slide Switch
    Test ActuationBy Pressing Metal Sensor Plate
    Dimensions135 x 70 x 25 mm
    Power Supply9 V Battery
    Battery StatusBy Dual Color LED
    CalibrationRecommended Every 12 months
    OptionalInstruction Board,Foot Plate,Carry Case

    Wrist Strap & ESD foot wears are the first line of defence against electrostatic charges build up on the human body. It is designed to carry away this charge as soon as it is generated. At the same time wrist strap/foot wear must remain electrically safe for the user. Thus, it is important to test every wrist strap / footwear regularly. In order to protect the sensitive electronic components the maximum wrist strap resistance should not more than 10 Meg ohms and foot wears resistance should not more than 100 Meg ohms. On the other end, the resistance should not be less than 0.75 Meg ohms as protection to the wearer from dangerous level of the voltage and current flow. The wrist strap and the footwear tester checks these parameters under actual operating conditions with the strap on the wrist or foot wear on the foot. It clearly indicates whether or not the resistance the wrist strap/foot wear system including the wearer is at least 0.75 Meg ohms and not more than 10/100 Meg ohms respectively. 


    Yes! I am interested


    Get Best Quote

    Approx. Rs 3,600 / Piece Get Latest Price

    Product Details:
    BrandGlobal Statclean
    ColorYellow
    IndicationsPass Fail
    Voltage9V DC
    ModelWSM-02
    ApplicationLaboratory

    We are a leading manufacturer, supplier, and wholesaler of Two Operator Continuous Workstation Monitor.


    Application:

    • The Model WSM-02 is designed to continuously monitor the connections of ESD wrist strap & work surface for two operators.

    Yes! I am interested


    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 8,500 / Set Get Latest Price

    Product Details:
    BrandGlobal Statclean
    Voltage10 kV
    ColorBlack
    MaterialStainless Steel
    Weight2.27 kg (5 Pound)
    Power Supply Battery9 Volt Battery

    We offer Testing and Measuring Probes using surface resistivity meters to our clients.


    Yes! I am interested


    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 18,500 / Piece Get Latest Price

    Product Details:
    Power Supply230V AC 50Hz 70 Watts
    Weight7 kg
    WarrantyOne Year
    Noise Level55 dbA at 1m
    Air Flow425 cm/hr
    Ionization Potential6-8 KV
    Ion Balance-/+ 50 V
    ConstructionPowder-coated Sheet metal enclosure
    DimensionsL1000 x B170 x H130 mm

    Manufacturer of Over Head Ionizer based in New Delhi, India The generation and accumulation of unwanted electrostatic charges, both surface and airborne, poses a serious problem in various industries, work areas laboratories. For instance, static charges can cause havoc in the electronic assembly shopfloor.

     

    This OVERHEAD unit can be conveniently hung over the work area for a large coverage to neutralise the charges on personnel or on any item entering an ESD sensitive area. This is achieved with a stream of ionized air. "Ion showering" is the only effective method of removing static charges from non-conductive objects and surfaces.

     

    The unique high-efficiency pulse circuitry provides fast discharge with limited air flow. It works on the principle of high-voltage corona discharge to produce the neutralising ions. Ion Balance is maintained irrespective of supply voltage and even if the discharge electrodes are dirty. Balanced output is essential when used in critical ESD sensitive areas.


    Other Details:
    • ESD sensitive work areas and assembly units.
    • Plastic and paper industries
    • IT Computer industry


    Yes! I am interested


    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 18,500 / Piece Get Latest Price

    Product Details:
    WeightApex. 2.9 Kgs
    WarrantyOne Year
    Noise Level45dba (at 1 m)
    Dimensions230 x 150 x 110mm
    Air Flow1.8 cu m/min
    Ionization Voltage+/- 6KV
    Un Balance Voltage< +/- 100V
    ConstructionPower coated MS cabinet

    We are the most trusted name engaged in offering a superior quality Bench top Ionizer.

     

    The generation and accumulation of unwanted electrostatic charges,both surface and airborne, poses a serious problem in various industries and laboratories. For instance, static charges can create havoc with sensitive equipmentand electronic components.This Bench Top Instrument isdesigned to neutralize your ESD work-station or ESD protected area with a stream of ionized air. It does what Wrist straps, conductive mats ESD Laminates cannot do i.e remove static charges from nonconductive objects and surfaces.



    Yes! I am interested


    Get Best Quote

    Approx. Rs 1,900 / Piece Get Latest Price

    Product Details:
    Weight130 g
    ModelWSM-01
    ApplicationIndustrial, Laboratory
    Repeatability10%
    Input Voltage12 V
    Dimension125 x 65 x 35 mm

    We are a leading manufacturer, supplier, and wholesaler of One Operator Continuous Workstation Monitor.

    Application:

    • The Model WSM-01 is designed to continuously monitor the connections of ESD wrist strap & work surface.

    Yes! I am interested


    Get Best Quote

    Approx. Rs 12,500 / Piece Get Latest Price

    Product Details:
    BrandGlobal Statclean
    Usage/ApplicationHospital
    Indicating Range0-1999 V
    Power Supply9 V
    ApplicationGovernment,Laboratories,ESDS Devices
    ModelSC-01

    We are a leading manufacturer of Human Body Voltage Checker in India.

    Application & Features: 

    • Human body voltage checker is a new and unique visual method of detecting how much static charge a person is carrying. The unit can be wall mounted outside the ESD protected area to avoid charged persons unknowingly entering.The meter must always be grounded to produce an accurate measurement. But more importantly to allow the operator to discharge to a safe handling limit. Touch the Touch to test, and watch the Liquid Crystal Display indicated between 0 to 1999V of the static charge +/- Polarity.

    Yes! I am interested


    Get Best Quote

    Approx. Rs 2,500 / Piece Get Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    BrandGlobal Statclean
    ColorYellow
    Wrist Strap Range0 to 10 Meg ohmss
    ModelWSM-03
    ApplicationIndustrial, Laboratory
    Indications Pass Green LED FailFlashing Red LED
    Audible AlarmFor Fail Mode
    Input Power12V @ 500 ma DC5
    Accuracy+/-10%
    Repeatability+/-10%
    Dimensions125x65x35 mm
    Weight120 g
    OptionalGrounding Cord 12 V Adopter
    Warranty1 Year

    We are a leading manufacturer, supplier, and wholesaler of Continuous Wrist Strap Monitor.

    Application:

    This model wsm-03 continuously monitors the wrist strap to detect loss of continuity between operator and monitor. Conditions such as broken coil cords and improper contact with the skin are detected instantly to alert the operator before serious and expensive ESD damage can occur. As there is no resistive return path from the wrist strap, it uses the “capacitive ac pulse principle” to check if the operator is adequately grounded. The system is automatically activated when the wrist strap is plugged in. Continuous monitoring reduces the need for periodic checks and audits and also ensures greater security.



    Yes! I am interested


    Get Best Quote

    Approx. Rs 2,450 / Piece Get Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    BrandBakon
    Usage/ApplicationLaboratory
    Battery Life150 Hours
    Weight200 g
    Power SupplyDC9V
    Model Number191
    Body MaterialPlastic

    Product Specification for "Soldering iron thermometer"

    Yes! I am interested


    REQUEST CALLBACK
    Get Best Quote

    Approx. Rs 19,500 / pcs Get Latest Price

    Product Details:
    Input power230 V, AC, 50 Hz
    Weight5.5 Kg
    BrandGlobal
    Dimension165 mm x 240 mm x 190 mm
    Power Consumption50 w

    Ionizing Air Gun We are instrumental in offering a complete range of Ionizing Air Gun for our clients. Our range of Static Eliminator is known in the market for its excellent performance

    Features Benefit :
    • Consistent, uniform winding gives more robust and stable performance.
    • More powerful static neutralization, lower electrical stress and increased reliability.
    • Short circuit current of IEC fused mains connector Enables fast and easy connection to mains supply and
    • Reduced installation time.
    • Maximum load Equivalent to 10 metres of ionizing appliances cable
    • Specification :

    Applications :
    • Packaging
    • Plastics
    • Printing
    • Paper
    • Food
    • Pharmaceutical
    • Medical
    • Automotive
    • Electronics
    • Textiles
    • Optics

    Yes! I am interested


     






    Corporate Brochure




    Explore More Products
     
    View Mobile No.

     

    Send SMS
    Ashok Gupta  (Proprietor)
    Global Statclean Systems
    KH 375, H Block, Gali No. 5
    GT Karnal Road, Swaroop Nagar, New Delhi - 110042 , Delhi , India
    Send E-mail
    Share Us:
    X